Assign ringtones to internal extensions on Yealink phone
You can assign ringtones to internal extensions on the Yealink phone which helps you to differentiate between internal calls and external calls.
12 December, 2016
- All
- GUI VOIspeed V6
- Server UCloud
- VOIspeed User Interface
Auto Dial: Dial a number when you lift the handset
The Polycom IP phone allows you to dial the specified number automatically when you lift the handset.
12 December, 2016
Control your Yealink phone from Keypad
RESTART THE PHONE: To restart the phone from the keypad of a Yealink phone press the X button for at least 10 seconds and you will see the reboot.
12 December, 2016
Import phonebook to Polycom V-6060
To import the address/ phone book book you will need the files below: TFTP server (available to download free) Configuration file which contain.
12 December, 2016
Reset and restart Polycom phones via keyboard
You can reset or restart the Polycom phone by using multiple combinations of keys from the phone.
12 December, 2016
Reset DECT GIGASET N510 PRO to the factory settings
The reset of Gigaset Dect base will wipe out all the settings of the base including the configuration file.
12 December, 2016
User Area FAQ
Introduction : The user area is a useful online portal where you can change the behaviour of your phone and access call reports.
12 December, 2016
Configuration V-6016 FXS SIP gateway
If the LAN network is configured with the sub-network 192.168.1.xx you need to go directly to the configuration between a PC connected
12 December, 2016
Configuration Yealink IP phone
Connect to the Web Configuration Utility of the phone by browsing its IP address. Please follow the instructions…
12 December, 2016
Gigaset dect N300 IP base station setup
Follow the steps below to configure dect N300 IP: Connect the Gigaset base with power supply and Ethernet cable provided
12 December, 2016
VOIspeed V-6021- GSM Gateway
VoIP GSM gateways are widely used and require SIM cards to communicate with the PBX via a SIP server.
12 December, 2016
Analog Adapter 2 FXS Cisco SPA112
The Cisco SPA112 is a SIM adapter for analog telephones with 2 FXS ports. It allows to integrate up to two traditional analogue devices
12 December, 2016